Products and services
for energy savings and comfort
at home and in commercial & industrial buildings

TYXIA 4811

TYXIA 4811
References
6351107 TYXIA 4811

10 Amp flush mounted wireless receiver micromodule - powered output - 1 on/off channel + timer

Others documents

< Close >
• Ideal for controlling lighting up to 10 Amps,
• Suitable for buildings where there is public access for:
• controlling an air vent or lighting in a toilet or bathroom based on sustained presence being
  detected
• add a lighting timer function to a stairwell or corridor from a movement detector or hard-wired push button
• allows the addition of new wireless control points to the hard-wired switch on a lighting circuit,
• Timer function: adjustment of the lighting operation time between 10 sec and 1 hr.
• Warning that lighting is about to go off: the lights flash once initially and then a second
  time informing the user before the lights switch off completely,
• Special timer for rooms with extractor fans: in association with a presence detector, operates the extractor in the event of the detection of presence for longer than 80 seconds.
• 1 10A 230V On/Off output control channel
• 2 pre-wired wires for connection to the local switch or to a presence detector with a non-powered dry output contact
• 1 hard-wired live input on twilight presence detector with powered live output contact
• Max. power:
> on resistive load: 2300W
  > on electronic or ferromagnetic transformer:
   1000W
> on other loads: 300W
• Timer period can be adjusted from 10 seconds to 1 hour
• 230V phase and neutral supply
• Operating temperature:  -5 to +40°C
• Dimensions: H 33 x L 50 x D 47 mm
Schéma
EN